3 Series E36 Z3 (M44) ROADST
12 14 520
Replacing impulse sensor (M44)
Switch off ignition
Remove upper section of manifold,
refer to 11 61 040
Disconnect connector (2).
Unscrew bolt (1).
Remove sensor (2).
Installation:
Check seal, replacing if necessary.
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
RA Replacing impulse sensor (M44)
BMW AG - TIS
10.02.2013 23:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -