3 Series E36 Z3 (M44) ROADST
13 62 531
Replacing temperature sensor for coolant
(M44)
Switch off ignition.
After checking function of Digital Motor Electronics (DME),
refer to 13 00 002
Unfasten plug connection (1).
Unscrew temperature sensor (2).
Tightening torque,
refer to Technical Data 13 62 6AZ
Installation:
Always replace sealing ring.
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
Check coolant level and top up if necessary.
RA Replacing temperature sensor for coolant (M44)
BMW AG - TIS
10.02.2013 23:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -