3 Series E36 Z3 (M44) ROADST
Expose connection point trunk floor / wheel arch.
Expose and cut through connection point between side member
on underfloor.
Expose connection point between side member on right
underbody.
Cut through trunk floor roughly.
Remove trunk floor.
Caution!
Do not damage front crossmember on trunk floor (1)!
Remove scrap metal.
Straighten and grind joint surfaces.
RA Replacing complete rear trunk floor (tail panel removed) (Z3)
BMW AG - TIS
11.02.2013 05:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
