3 Series E36 Z3 (M44) ROADST
Expose connection point between outer rear wheel arch
and lower convertible top compartment.
Expose connection point between trunk floor and
lamp console.
Expose connection point in convertible top compartment.
Drill out all exposed welding points on the connection points.
Remove rear inside wheel arch, then remove scrap sheet metal.
Straighten and grind joint surfaces.
RA Replacing rear inside left wheel arch (Z3)
BMW AG - TIS
11.02.2013 05:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
