bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Complete Rear Bumper (Z3 Roadster, M Roadster, Z3 Coupé,|Page 1879 > < 7 RA Replacing A Shock Absorber For Bumper, Front (Z3 Roadster, M Roadster, Z3 Coupé,
Page 1
background image

51 12 000

Removing and installing complete rear
bumper (Z3 Roadster, M Roadster,
Z3 Coupé, M Coupé)

Remove spare wheel, refer to Owner's Handbook.

Remove and install rear wheel housing cover, left and right,

refer to 51 71 041.

Z3 roadster only:

Unclip lamps (1) from license plate lighting on broad rib. Unfasten
connector and remove license plate lighting.

M roadster only:

Release lamp (1) of license plate lighting towards rear and lift out
upward. Unfasten connector and remove license plate lighting.

Unscrew bolts (1).

Installation:

Tightening Torque,

refer to Technical Data 51 12 2AZ.

RA  Removing and installing complete rear bumper (Z3 Roadster, M Roadster, Z3 Coupé,

BMW AG - TIS

11.02.2013  06:03

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Complete Rear Bumper (Z3 Roadster, M Roadster, Z3 Coupé,|Page 1879 > < 7 RA Replacing A Shock Absorber For Bumper, Front (Z3 Roadster, M Roadster, Z3 Coupé,