3 Series E36 Z3 (M44) ROADST
Open trunk lid.
Tighten screws on lower section of trunk lid lock.
Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.
Unscrew detent buffer until closed trunk lid is flush on left/right
detent buffers.
Caution!
The trunk lid must not be higher than the side panels,
otherwise preload would affect height adjustment!
RA Adjusting trunk lid lock (Z3 roadster)
BMW AG - TIS
11.02.2013 06:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
