3 Series E36 Z3 (M44) ROADST
Unfasten left/right screws (1) and center (2) of tackstrip (3).
Note:
Do not unfasten screw (4).
Unfasten screws (1) and (2) on left/right of tackstrip (3) in
convertible top compartment.
Note:
Do not unfasten left/right screw (4).
If necessary, note number of shims on left/right screw (1) and
fit back in same location during installation.
Note:
The operation "Removing tackstrip" ends here.
Follow installation instructions, refer to "Installing tackstrip".
Removing complete convertible top:
Pry out gas spring strut inward at top with special tool 00 9 319.
RA Removing and installing complete convertible top (Z3 Roadster, M Roadster)
BMW AG - TIS
11.02.2013 07:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -