3 Series E36 Z3 (M52) ROADST
Fold wiring harness (1) to one side.
Fold up retaining clip (2) on plug connection.
Disconnect connector.
Refer to Electrical Troubleshooting Manual for 3 Series, E 36
for pin allocation and further instructions.
Installation:
Observe control unit part number and coding when replacing.
Interrogate fault memory of DME control unit, check faults in
memory then cancel fault memory.
RA Replacing control unit (DME) (Z3)
BMW AG - TIS
11.02.2013 01:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
