3 Series E36 Z3 (M52) ROADST
Release screws (1).
Remove switch.
Installation:
Clean sealing surface on oil sump.
Replace seal on level switch.
Installation:
Fill system with engine oil.
Resecure oil filter cap.
Tightening Torque,
refer to Technical Data 11 42 2AZ.
RA Replacing level switch for engine oil (M52, M60)
BMW AG - TIS
11.02.2013 01:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
