3 Series E36 Z3 (M52) ROADST
Unscrew transmission on engine.
Unscrew Torx bolts with a Torx socket.
Installation:
Check that washers are fitted to Torx screws.
Tightening torque,
refer to Technical Data 24 00 1AZ.
Secure the converter so that it cannot slip out by positioning and
clamping special tool 24 4 080 on the transmission housing with
the flat side of the retaining tongue (1) facing the converter.
Pull transmission off engine.
Caution!
A lifting fixture with mounted transmission may be moved only
in completely lowered position.
Danger of accident!
Caution!
Check that dowel sleeves (1 and 2) are not missing.
If applicable, transfer dowel sleeves from transmission or use new
dowel sleeves.
RA Removing and installing automatic transmission (A5S 310Z)
BMW AG - TIS
11.02.2013 02:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
