3 Series E36 Z3 (M52) ROADST
32 21 151
Replacing left or right tie rod
Caution!
After assembly, align front axle,
refer to 32 00 610.
Remove front wheel,
refer to 36 10 300.
Loosen nut.
Installation:
Tightening Torque,
refer to Technical Data 32 21 5AZ.
Unscrew nut and pull off tie rod using special tool 32 2 070.
Installation:
Remove grease from pin and bore. Replace self-locking nut.
Tightening Torque,
refer to Technical Data 32 21 3AZ.
RA Replacing left or right tie rod
BMW AG - TIS
11.02.2013 04:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
