3 Series E36 Z3 (M52) ROADST
Slightly raise semi-trailing arm, unfasten screw, remove shock
absorber and lower semi-trailing arm slightly.
Installation:
Tightening Torque,
refer to Technical Data 33 52 1AZ
Unscrew screw.
Installation:
Replace self-locking nut.
Tightening Torque,
refer to Technical Data 33 17 4AZ.
Lower rear axle until coil springs are exposed.
Remove coil springs.
Lower rear axle and drive out.
RA Removing and installing complete rear axle carrier (compact, Z3)
BMW AG - TIS
11.02.2013 05:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
