3 Series E36 Z3 (M52) ROADST
Expose and mark joint on engine support.
1 = End wall
2 = Bore
∅
12 mm
3 = Joint on engine support
Cut engine support.
Drill off spot welding.
Remove engine carrier.
Remove scrap metal.
Straighten and grind joint surfaces.
Mark and cut spare part for engine support joint.
Dimension of joint on spare part is identical to that on vehicle.
RA Replacing left engine support (partial replacement from front sub-frame) (Z3)
BMW AG - TIS
11.02.2013 06:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -