3 Series E36 Z3 (M52) ROADST
41 62 000
Installing and removing trunk lid (Z3)
Note:
Engine hood was fitted and bolted in an unfinished body
shell.
Unpainted surfaces become visible after subsequent
movement.
These surfaces must be touched up with paint in the body
color.
The luggage compartment lid wire harness does not have a point
of connection.
Wire harness must be removed from the luggage compartment lid
to remove the luggage compartment lid.
Disconnect gas pressure props.
Caution!
Gas pressure props have strong tension.
Loosen left and right bolts (1).
Unscrew left and right bolts (2).
Remove trunk lid.
RA Installing and removing trunk lid (Z3)
BMW AG - TIS
11.02.2013 07:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -