3 Series E36 Z3 (M52) ROADST
Mount and press seal on to rear window glass at bottom.
Mount and press seal on to rear window glass at top and sides.
Caution!
The basic filler must have hardened!
Treat rear window and hard top in adhesive area with BMW-
approved materials (repair kit, sourcing reference: BMW Parts
Service),
refer to 51 31 ...
Note:
Note specified ventilation time.
Cut nozzle to size.
(A) = 9 mm
(B) = 6 mm
Note:
To apply a uniform glue bead, use cartridge pistol (operated
by compressed air or electrically-powered, sourcing reference:
BMW Parts Service).
Check expiry date of glue!
If necessary, apply a test bead before gluing.
Cartridge must be arranged vertically against rear window.
RA Removing and installing/replacing rear window for hard top
BMW AG - TIS
11.02.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
