3 Series E36 Z3 (M52) ROADST
Caution!
Before hardening, remove contamination by residual adhesive
with Sika remover 208 (sourcing reference: BMW Parts
Service). Do not press out rear window glass again for this
purpose. Hardened glue can only be removed by machine.
Assemble car.
After the hardening time, remove adhesive tapes.
Note:
Leaks can be found by spraying water on the sealing lips or
with an ultrasonic leak detector (refer to BMW Parts Service)
and then eliminated by using a suitable nozzle.
RA Removing and installing/replacing rear window for hard top
BMW AG - TIS
11.02.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -