bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing_replacing Control Unit_regulator For Evaporator Temperat > < 10 RA Removing And Installing Heater Control (Z3 Roadster, Z3 Coupé)
Page 1
background image

64 11 820

Replacing actuator drive of fresh air flaps (Z3
roadster, Z3 coupé)

Remove lower left trim for instrument panel,

refer to 51 45 180

Remove regulator for evaporator,

refer to 64 11 901

Unfasten screw and unclip left footwell air outlet.

Note:

Operation illustrated after removal.

Unfasten screws and remove connector.

Note:

Operation illustrated after removal.

Press actuator drive slightly downwards and unclip actuating lever.

Installation:

First press actuating lever onto the shaft until it is heard to
engage, then tighten down the actuator drive.

Note:

Operation illustrated after removal.

RA  Replacing actuator drive of fresh air flaps (Z3 roadster, Z3 coupé)

BMW AG - TIS

11.02.2013  09:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing_replacing Control Unit_regulator For Evaporator Temperat > < 10 RA Removing And Installing Heater Control (Z3 Roadster, Z3 Coupé)