bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 SI Reduced Air Output E36 With IHKR > < 2 SI IHKA Control Panel_ LED In A_C Button Flashes All Models With Integrated Automat
Page 1
background image

VK-23/Kehrer

Baugruppe/Group: 64

64 06 96 (070)

weltweit
all countries

04/1996
Stand: 07/1996

Operating noise from the air-conditioning (a/c) compressor

E36 with a/c unit

Complaint: 

At certain engine speeds, the a/c compressor produces an audible level of operating noise.

Cause: 

Dirty tensioning roller (without dust cover) on a/c compressor.

Affected
vehicles:

E36 4-cylinder - without diesel - with special equipment air-conditioner
Manufacturing period: from start of series production until end of 1995.

Procedure:

In the case of customer complaint, fit a new tensioning roller (with dust cover on the reverse
side): do not replace the compressor, 

see Repair Instructions 64 52 001.

Parts: 

Tensioning roller with cover: part number 11 28 2 245 087

Reimbursement: 

Material and labor costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:

Temporary defect code

64 52 91 39 00
This defect code is not listed in the official Defect
Code Catalogue but it has been recorded in the
system. This will enable warranty claims to be
processed.

Replacing tensioning roller:

Job number

64 52 110

Labour

see Flat Rate Manual

Warranty type

1

Warranty stage

1 (within vehicle warranty)
2 (outside vehicle warranty)

Reimbursement is restricted to 36 months/100 000 km and limited to December 1997.

SI  Operating noise from the air-conditioning (a/c) compressor E36 with a/c unit

BMW AG - TIS

10.02.2013  23:26

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 SI Reduced Air Output E36 With IHKR > < 2 SI IHKA Control Panel_ LED In A_C Button Flashes All Models With Integrated Automat