3 Series E36 Z3 (M52TU) ROADST
Fit special tool 11 2 385 to crankshaft.
Align groove of special tool 11 2 385 to featherkey of
crankshaft.
Note:
Special tool 11 2 385 centers special tool 11 2 380 .
Screw in special tool 11 2 380 until it has made firm contact with
radial seal.
Remove radial seal by tightening screw on special tool.
Installation:
Coat sealing lips of new radial sealing ring with oil.
Using special tool 11 3 280 and centering screw, install new
radial seal flush with timing case cover.
RA Replacing radial seal in lower timing case cover
BMW AG - TIS
11.02.2013 00:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -