3 Series E36 Z3 (M52TU) ROADST
Insert and tighten down screw-in pin.
Tightening torque 11 31 11AZ
.
Install secondary chain tensioner.
Fit toothed sleeve (6) and align to toothed shaft in camshaft so
that tooth gaps are opposed.
Secure toothed shaft (5).
Insert pin of toothed shaft (5) into tooth gaps of splines on
camshaft and toothed sleeve (6).
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
11.02.2013 00:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
