3 Series E36 Z3 (M52TU) ROADST
Important!
Fit special tool 11 6 150 "without gasket" only.
If gasket remains underneath special tool 11 6 150 ,
camshaft timing will be "incorrectly" set.
Attach special tool 11 6 150 "without gasket", tighten nuts by
hand and then tighten down uniformly until special tool
11 6 150 is in full contact with cylinder head.
Insert screws (1) on exhaust side and initially tighten to approx.
5 Nm.
Initially tighten nuts (2) on exhaust side and nuts (3) on inlet side
to approx. 5 Nm.
Tighten down screws (1) on exhaust side.
Tightening torque 11 31 3AZ
.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
11.02.2013 00:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -
