3 Series E36 Z3 (M52TU) ROADST
Tighten down nuts (2) on exhaust side and nuts (3) on inlet side.
Tightening torque 11 31 11AZ
.
Pull special tool 11 2 300 back until flywheel is no longer
secured in position.
Remove special tool 11 3 244 and special tool 11 3 240 .
Crank engine twice in direction of rotation until cam tips on inlet
and exhaust camshafts on 1st cylinder face one another.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
11.02.2013 00:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 19 -
