3 Series E36 Z3 (M52TU) ROADST
Remove right engine support arm from engine block.
Remove right engine mount from front axle support.
Note:
Rear exhaust manifold with catalytic converter can only be
removed after front exhaust manifold with catalytic converter has
first been removed.
Remove front exhaust manifold with catalytic converter.
Remove rear exhaust manifold with catalytic converter.
Installation:
Clean sealing faces, replace gaskets.
Coat thread with copper paste -CRC-.
Replace nuts.
Tightening torque, 11 62 1AZ.
RA Removing and installing both exhaust manifolds with catalytic converter (M52TU /
BMW AG - TIS
11.02.2013 01:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
