3 Series E36 Z3 (M52TU) ROADST
E46:
Remove fuel pump relay,
refer to 13 63 590.
E38:
Remove fuel pump relay,
refer to 13 63 590.
Connect up special tool 61 3 050 to terminal 87b and
terminal 30.
Operate button for approx. 10 sec and read off delivery pressure
at DIS Tester.
Technical Data for fuel pump, refer to MG16.
Note:
Removing special tool kit 13 5 220:
-
Switch off engine.
-
Screw out check valve again fully.
-
Remove special tool kit 13 5 220 from pressure regulator
housing.
-
Catch and dispose of escaping fuel.
Interrogate fault memory of DME control unit. Check stored fault
messages. Rectify faults. Now clear the fault memory.
RA Checking fuel pump delivery pressure (M52, M52TU)
BMW AG - TIS
11.02.2013 01:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
