3 Series E36 Z3 (M52TU) ROADST
13 53 240
Replacing complete injection pipe (M52TU)
Turn off ignition.
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1) and remove lower section of microfilter
housing (2).
Remove cover from fuel injectors. Unclip screw caps and release
screws.
Detach low pressure hose (1) from pressure regulating valve.
Disconnect plug connection for intake air temperature sensor (2).
Detach terminal strip (3) for fuel injectors.
RA Replacing complete injection pipe (M52TU)
BMW AG - TIS
11.02.2013 01:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
