3 Series E36 Z3 (M52TU) ROADST
13 62 531
Replacing coolant temperature sensor
(M52TU, M54)
Turn off ignition.
Installation location:
Coolant temperature sensor (1) is fitted below intake air manifold
in cylinder head of cylinder 6.
Remove intake air manifold.
Disconnect plug connection (1).
Unscrew temperature sensor.
Installation:
Tightening torque, 13 62 2AZ.
Check coolant level, top up coolant if necessary.
Note:
Read out fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing coolant temperature sensor (M52TU, M54)
BMW AG - TIS
11.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
