3 Series E36 Z3 (M52TU) ROADST
16 12 010
Removing and installing/replacing carbon
canister (Z3)
Unlock and disconnect plug connection (1) of vent line to
expansion tank.
Open hose clip (6) and pull off scavenging line (2).
Detach evaporation line (3) from carbon canister (4).
Release screws (5). Lift carbon canister (4) out of metal bracket.
Installation:
Make sure plug connection (1) engages properly.
Replace hose clip (6).
Tightening torque,
refer to 16 12 7AZ.
RA Removing and installing/replacing carbon canister (Z3)
BMW AG - TIS
11.02.2013 01:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
