3 Series E36 Z3 (M52TU) ROADST
21 52 510
Removing and installing/replacing clutch
slave cylinder
Note:
After completing work bleed clutch hydraulic system,
refer to 21 00 006 .
Remove underbody protection from transmission.
Seal supply hose to clutch master cylinder with special tool
13 3 010.
Remove pressure line from clutch slave cylinder.
Installation:
Tightening torque,
refer to Technical Data 21 52 1AZ .
Unscrew nuts.
Note:
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Installation:
Tightening torque,
refer to Technical Data 21 52 5AZ .
RA Removing and installing/replacing clutch slave cylinder
BMW AG - TIS
11.02.2013 02:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
