3 Series E36 Z3 (M52TU) ROADST
23 12 086
Replacing radial seal on selector shaft (S5D
200G/250G)
Unflange propeller shaft from transmission and tie up to one side,
refer to 26 11 000
Push back locking sleeve (1) and drive out cylindrical pin (2).
Pry out radial sealing ring (3) with a narrow screwdriver.
Lubricate sealing lip of radial seal ring with oil.
Drive in radial seal flush with special tool 23 1 240.
Check oil level, correcting if necessary.
RA Replacing radial seal on selector shaft (S5D 200G/250G)
BMW AG - TIS
11.02.2013 02:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
