3 Series E36 Z3 (M52TU) ROADST
Version with flexible disk:
Remove flexible disk from transmission.
Release nuts.
Tightening torque, 26 11 1AZ.
Installation:
Replace self-locking nuts.
Tighten screw connection by way of nut.
To prevent subjecting flexible disk to torsion stress, only turn
nuts/screws on flange side.
Version with universal joint:
Remove universal joint from transmission.
Release nuts.
Tightening torque, 26 11 2AZ.
Installation:
Replace self-locking nuts.
Tighten screw connection by way of nut.
Release threaded sleeve (1) several turns with special tool
26 1 040 .
Tightening torque, 26 11 3AZ.
Installation:
After completing installation, tighten threaded sleeve with
special tool 26 1 040 .
RA Removing and installing propeller shaft - version with slide
BMW AG - TIS
11.02.2013 03:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
