3 Series E36 Z3 (M52TU) ROADST
Apply Kukko puller on center bearing in such a way that dust
cover (6) cannot be damaged.
Pull off center bearing with ball bearing.
If dust cover was damaged (deformed), pull off dust cover with
Kukko puller and replace.
Knock on dust cover to fit tightly using Special Tool 23 1 160.
Drive on center bearing with ball bearing to fit tightly using special
tool 23 1 160.
Caution!
Check synchronization and movement of center bearing.
RA Replacing complete propeller shaft center bearing - version with slide
BMW AG - TIS
11.02.2013 04:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
