3 Series E36 Z3 (M52TU) ROADST
31 12 130
Replacing rubber mounts for control arm
Caution!
Always replace left and right-hand rubber mounts and use
mounts of same make (shown on mounts).
Removing bracket for control arm,
refer to 31 12 046.
Press rubber mount out of bracket using special tool 31 2 130.
Installation:
Check installation location.
Arrow on rubber mount points towards mark (1) on bracket.
Remove grease from bracket and rubber mount.
Apply rubber mount on bevelled side of bracket and press in with
special tool 31 2 130.
RA Replacing rubber mounts for control arm
BMW AG - TIS
11.02.2013 04:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -