3 Series E36 Z3 (M52TU) ROADST
32 33 010
Removing and installing sports steering
wheel
Warning!
Conform with safety precautions!
Incorrect handling can activate airbag and cause injury.
Disconnect battery and cover negative pole or terminal.
Remove airbag unit.
Turn steering wheel to straight-ahead position (markings on
steering gear and steering spindle aligned).
Unscrew bolt. Mark position of steering wheel relative to steering
spindle. Pull off steering wheel.
Note:
The loosening of the screw activates the spring clip (1) which
holds contact ring in center position.
Installation:
Lockpin (1) must engage in opening (2) of contact ring.
Tightening torque,
refer to Technical Data 32 33 1AZ.
RA Removing and installing sports steering wheel
BMW AG - TIS
11.02.2013 04:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -