3 Series E36 Z3 (M52TU) ROADST
Unclip retaining ring (11).
Remove vane blades (12) and O-ring (13).
Remove rotor (14) and pressure plate (15).
Remove front case section from the shaft.
Pry out radial shaft seal (16).
Thoroughly clean all parts.
Coat new O-rings with hydraulic fluid prior to installation,
refer to BMW Service Operating Fluids.
RA Dismantling and assembling vane pump (LuK/Vickers pump)
BMW AG - TIS
11.02.2013 05:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
