3 Series E36 Z3 (M52TU) ROADST
Tighten down collar nut (1) until marker points are aligned.
Important!
Do not under any circumstances tighten down collar nut
beyond the marker points, otherwise replace clamping sleeve.
To this end, the marker points must be aligned before starting
work.
Drive in new tab washer with special tools 00 5 500 , 33 3 480
and 33 3 490 .
RA Replacing shaft seal for drive flange on final drive
BMW AG - TIS
11.02.2013 05:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -