3 Series E36 Z3 (M52TU) ROADST
Press out outer bearing race with special tool 33 1 350
(extractor fixture) and special tool 33 1 351 (extractor star tool).
Caution!
Special tool must engage in the bearing outer race.
Installation:
Press-fit new bearing outer races with special tool 33 1 373
(pressure plate).
Caution!
Only use same make bearings for both bearings.
If applicable, replace shaft seal for input flange,
refer to 33 11 021
If applicable, replace drive pinion,
refer to 33 12 551
RA Removing complete locking differential. (Type K) - final drive removed -
BMW AG - TIS
11.02.2013 05:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
