3 Series E36 Z3 (M52TU) ROADST
Remove circlip.
Installation:
Replace stretched or damaged circlip. Ensure correct seating
in groove.
Pull out angular contact ball bearing with special tool
33 4 041/042/043/044/045.
Caution!
Do not reuse the old angular contact ball bearing.
Pull in new angular contact ball bearing with special tool
33 4 041/ 042/ 043/ 046/ 047.
RA Replacing wheel bearing on left or right rear axle shaft (compact, Z3 1.8/1.9)
BMW AG - TIS
11.02.2013 05:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
