3 Series E36 Z3 (M52TU) ROADST
34 11 519
Removing and installing or replacing left or
right front brake caliper
Note:
Remove wheels.
Important!
After completing tasks, bleed brake system.
Apply pedal prop and depress brake pedal slightly. This prevents
brake fluid from emerging from the expansion tank and air from
entering the brake system after the brake lines have been
detached.
Disconnect brake pipe from connection with brake hose.
Left:
Remove connector for wear indicator.
Installation:
Tighten brake hose on brake caliper.
Set steering to straight-ahead setting.
Screw brake hose to brake line, ensuring that brake hose is
not twisted.
Tightening torque, 34 32 1AZ .
RA Removing and installing or replacing left or right front brake caliper
BMW AG - TIS
11.02.2013 06:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -