3 Series E36 Z3 (M52TU) ROADST
Open hood lid again and tighten screws.
Tighten retaining screws again.
Adjust height setting of hood lid.
To adjust height of retaining hook, unfasten lock nut (1) and turn
locking spigot (2).
Tighten lock nut again.
Check locks and retaining hook engage correctly, if necessary re-
adjust.
Unscrew detent buffer to the point where left and right sides of
closed hood lid lie flush with detent buffer.
Caution!
Hood lid must not be twisted by detent buffer!
RA Adjusting hood lid to fit (Z3)
BMW AG - TIS
11.02.2013 08:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -