3 Series E36 Z3 (M52TU) ROADST
Caution!
Before closing the trunk lid and when closing the trunk lid,
ensure that the body and/or trunk lid are not damaged.
Close trunk lid.
Adjust gap dimensions and position of trunk lid to other body
fittings.
Adjust lower section of trunk lid lock
(screws in lower section of trunk lid lock loosened to point where
they can be displaced):
Caution!
When gas pressure props are removed, unsecured trunk lid
drops without damping!
Close trunk lid, holding down the lock button to prevent the trunk
lid lock from engaging.
This enables lower section of trunk lid lock to adjust itself correctly.
Open trunk lid and secure it to prevent it from dropping.
Caution!
When gas pressure props are removed, unsecured trunk lid
drops without damping!
Tighten screws on lower section of trunk lid lock.
Reinstall gas pressure prop.
Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.
RA Adjusting trunk lid to fit (Z3)
BMW AG - TIS
11.02.2013 08:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -