3 Series E36 Z3 (M52TU) ROADST
Note:
The operation "Removing and installing/replacing glovebox
lock" for US version ends here.
Unfasten screws (1) and remove lock (2).
Only replace:
Note:
The lock cylinder (1) must remain in open position.
Clamp lock in vise. Drive out pin with punch (2) until handle (3)
can be pulled upwards and removed.
Insert vehicle key in lock cylinder (2).
Break open locks (1) if necessary and pull out lock cylinder (2)
with vehicle key.
RA Removing and installing/replacing lock for glovebox, right (Z3 Roadster, M Roads
BMW AG - TIS
11.02.2013 08:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -