3 Series E36 Z3 (M52TU) ROADST
51 16 060
Removing and installing or replacing interior
rearview mirror
Important!
Work may only be carried out at a room/object temperature of
18 ... 28
°
C.
If this cannot be guaranteed (cold/hot countries), it is
necessary to equalize the temperature of the windscreen,
mirror foot and rearview mirror (e.g. car left to stand indoors or
in the shade for at least 30 minutes).
Version with remote control for central locking:
If necessary, disconnect negative lead from battery.
Important!
To avoid breaking windscreen:
Snap out (press) rearview mirror only in direction of travel
towards windscreen.
Do not under any circumstances twist the mirror foot when
removing.
Twisting the mirror off the mirror mount will damage the rear
catch.
If the rear catch is damaged, the mirror will be loose when
installed and must be replaced.
Version with cable to interior rearview mirror:
Lever out plug trim cover in direction of arrow and disconnect plug
connection underneath.
RA Removing and installing or replacing interior rearview mirror
BMW AG - TIS
11.02.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -