3 Series E36 Z3 (M52TU) ROADST
Installation:
Fit muckets (1) and (2) to window guide rail (3).
Unfasten screws.
Installation:
Install screws with Loctite 270 (Sourcing Reference: BMW
Parts Service).
Tightening Torque, refer to Technical Data 51 21 1AZ
Unclip retainer (1) and lift out linkage (2).
Lift door lock (3) up slightly and disconnect linkage (4) from
outside door handle.
Remove door lock downwards.
Installation:
Insert frame for catch button through opening in inner door
panel. Do not bend linkage.
Lift cable (1) out of brackets (2) on door lock (3).
RA Removing and installing/replacing door lock on front left or right door (Z3 Road
BMW AG - TIS
11.02.2013 08:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -