3 Series E36 Z3 (M52TU) ROADST
51 24 004
Adjusting trunk lid lock (Z3 roadster)
Requirement:
Trunk lid and gaskets must be correctly fitted and adjusted.
If necessary, adjust trunk lid to fit,
refer to 41 62 014
Completely screw down detent buffer in left/right trunk lid.
Loosen screws in lower section of trunk lid until it is just still able to
move, allowing it to center itself.
The lower section of the trunk lid lock must not scrape against the
trunk lid lock.
Adjust lower section of trunk lid lock:
Close trunk lid, holding down the lock button to prevent the trunk
lid lock from engaging.
This enables lower section of trunk lid lock to adjust itself correctly.
RA Adjusting trunk lid lock (Z3 roadster)
BMW AG - TIS
11.02.2013 08:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
