3 Series E36 Z3 (M52TU) ROADST
Release screws (1) and remove cover (2).
Remove panel, rear window frame, bottom,
refer to 54 21 090.
Pull off molded roof lining (2) from rubber seal at front (1)
towards inside.
Raise molded roof lining (1) at rear window and slide towards
front.
Installation:
There must be four Velcro-type strips (1) on the hard top and
roof lining (2).
RA Removing and installing/replacing molded roof lining on hard top
BMW AG - TIS
11.02.2013 09:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -