3 Series E36 Z3 (M52TU) ROADST
Note:
Before unfastening the screws (1), note position and number
of spacer discs (2) (if fitted) because same number has to be
fitted at the same location (wind noise, leaks).
Unscrew bolts (1). Unfasten screw (2) and swivel support rails (for
the convertible top gasket) on left/right sides upwards.
Note:
Do not unfasten the screw for the interlock frame (adjustment
is changed).
Unfasten screws (1) on left/right windshield bracket (2) and fold
tab (3) upwards.
Unscrew bolts (1). Remove frame rail (2) from windshield bracket.
RA Replacing convertible cover (Z3 roadster)
BMW AG - TIS
11.02.2013 09:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -