3 Series E36 Z3 (M52TU) ROADST
Release screw (1) of spacer on left/right.
Note:
A mount can also be riveted down instead of a spacer.
Drill out rivets (1) on cowl on left/right.
Release screws (2) on center of cowl.
Pull out roof liner towards rear.
Installation:
Only aluminum rivets (1) may be used.
RA Removing and installing/replacing roof liner in convertible top (Z3 Roadster)
BMW AG - TIS
11.02.2013 09:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
