3 Series E36 Z3 (M52TU) ROADST
Important!
Check fluid level, top up if necessary.
Seal off lines and line connections:
Plug connections on hydraulic control unit:
Use the plugs (1) from the "Banjo bolts for hydraulic unit" set
(sourcing reference: BMW Parts Service) and the old seals for this
purpose.
Plug hose connections for hydraulic cylinder:
Use the plugs (1) and cap nuts (2) from the "Banjo bolts for
hydraulic unit" set (sourcing reference: BMW Parts Service) and
the old seals for this purpose.
RA Removing and installing/replacing hydraulic unit for convertible top drive unit
BMW AG - TIS
11.02.2013 09:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
