3 Series E36 Z3 (M52TU) ROADST
To adjust the lower gap, remove headlight again. Twist expanding
rivets (1) and reinstall headlight.
Close bonnet and check gap (B).
Adjust to approx. 0 mm if necessary by turning upper expanding
rivets (1). Then tighten down the top screws (2) by bracing the
expanding rivets (1).
Adjusting headlights,
refer to 63 10 004
RA Removing and installing/replacing entire left headlight (Z3 roadster, Z3 coupé)
BMW AG - TIS
11.02.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -