3 Series E36 Z3 (M52TU) ROADST
65 77 016
Removing and installing airbag control unit
(basic/central airbag unit or multiple restraint
system)
Warning!
Comply with safety precautions!
An incorrect procedure can lead to activation of the airbag
and possible injury.
Disconnect battery and cover negative pole or terminal.
Perform system check after assembly.
Saloon/Sedan, Coupé, Convertible, Touring, Compact:
Remove rear seat.
Unfasten screws.
Disconnect plug connection and remove airbag control unit.
Installation:
Arrow on unit shows direction of travel.
Observe tightening torque, 65 77 1AZ.
Z3 Coupé, Z3 Roadster, M Coupé, M Roadster:
Remove center console.
Disconnect plug connection.
Release screws (1) and remove airbag control unit.
Installation:
Observe tightening torque, 65 77 1AZ.
RA Removing and installing airbag control unit (basic/central airbag unit or multip
BMW AG - TIS
11.02.2013 11:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
